Wednesday, July 2, 2008

- GMC Denali Road Bike



GMC Denali Road Bike
The bike came with the typical assembly needed for a bike shipped in a cardboard box. Attach the steering column, front tire, seat, pedals, reflectors. Then adjust brakes and fine tune gears. No big deal. Several different size allen wrenches, open end wrenches, pliers, and a screwdriver were needed. It was not hard, but if you've never put a bike together before it might seem like a lot of work, and you still might wind up at a bike shop for proper gear and brake adjustments.

Initial thoughts:

It is a nice looking bike and since road bikes are pretty much only sold in bike shops, most people will assume it cost a LOT more than it really did. A friend asked if I spent "over $1,000" on it.

I have no problems with build quality. The welds look good, the bike seems solid, the seat tube fit fine. I was surprised how well the frame fits my 6'0" size.

The Good Things:

> Nice looking bike

> Could pass for a much more expensive bike

> Lightweight

> Great gears, I hit 38.5mph on a downhill with some gear remaining, and managed 32.4mph on level ground with a tailwind (measured using handlebar mounted GPS receiver). I can cruise overall in the 16-20mph range for the first hour.

> Seat post clamps down nicely and is plenty long enough

No comments:

Popular Posts